- Zipper Marking Machine
- Luggage Bag Machine
- Injection Molding Machine
- Zipper Teeth Making Machine
- Zipper Gapping & Stripping Machine
- Zipper Film Sealing Machine
- Zipper Holes Punching Machine
- Zipper Pin and Box Fixing Machine
- Zipper Slider Mount Machine
- Zipper Bottom Stop Machine
- Zipper Top Stop Machine
- Zipper Polishing Machine
- Zipper Cutting Machine
- Zipper Winding & Rolling Machine
- Zipper Ironing Machine
Let's take a look at the zipper head polishing machine that processes according to the material
A polisher, also known as a grinder, is often used for mechanical grinding, polishing, and waxing. Its working principle is: the motor drives the sponge or wool polishing disc installed on the polishing machine to rotate at a high speed. Because the polishing disc and the polishing agent work together and rub against the surface to be polished, the paint pollution, oxide layer and shallow marks can be removed. For the purpose, let's take a look at the zipper slider polishing machine that is processed according to the material.
The correct use of consumables also plays a key role in the polishing process of the zipper head polishing machine; the metallographic polishing agent is mainly used for the consumables of the polishing machine, light yellow Or yellow transparent liquid preparation, suitable for polishing all kinds of stainless steel or metal products. No corrosion to stainless steel, maintain the brightness of the metal surface without discoloration.
The key to the polishing operation is to try to get the maximum polishing rate so as to remove the damage layer produced during polishing as soon as possible. At the same time, the polishing damage layer should not affect the final observed tissue, that is, it will not cause false tissue. These two requirements are contradictory.
The former requires the use of coarser abrasives to ensure a larger polishing rate to remove the polished damage layer, but the polishing damage layer is also deeper; the latter requires the use of The finest materials, resulting in shallower polishing damage, but lower polishing rates. The best way to resolve this contradiction is to divide the polishing into two stages.
The first is rough polishing, the purpose is to remove the polishing damage layer. This stage should have the maximum polishing rate. The surface damage formed by rough polishing is a secondary consideration, but It should also be as small as possible; followed by fine polishing (or final polishing), the purpose of which is to remove the surface damage caused by rough polishing and minimize polishing damage.
When polishing the zipper head polishing machine, the grinding surface of the sample and the polishing disc should be absolutely parallel and lightly pressed on the polishing disc evenly. Too large to create new wear marks. At the same time, the sample should be rotated and moved back and forth along the radius of the turntable to avoid local wear of the polishing fabric too fast. During the polishing process, the micro-powder suspension should be continuously added to keep the polishing fabric in a certain humidity. Too much humidity will weaken the scratch effect of polishing.
The above is the zipper head polishing machine processed according to the material, I hope it will help you. The key to the operation of the polishing machine is to try to get the maximum polishing rate so as to remove the damage layer produced during polishing as soon as possible. At the same time, the polishing damage layer should not affect the final observed tissue, that is, it will not cause false tissue. If you have any other questions, please feel free to contact us, we will serve you wholeheartedly.