What is the working principle of zipper machinery?

The working principle of the zipper machine is similar to that of a syringe for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous state) into the closed mold cavity. Inside, the process of obtaining the product after the curing and shaping process inside the zipper machine.

The working principle of injection molding of zipper machinery is a cycle process, each cycle mainly includes: quantitative feeding - melt plasticization - pressure injection - mold filling and cooling - mold opening and pulling. After the plastic part is pulled out, the mold is closed again for the next cycle.

The operation items of the zipper machinery include control keyboard operation, electrical control system operation and hydraulic system operation. The selection of injection process action, feeding action, injection pressure, injection speed, ejection type, temperature monitoring of each section of the barrel, adjustment of injection pressure and back pressure, etc. are carried out respectively.

The molding process of the general screw zipper machine is as follows: first, the granular or powdery plastic is added into the barrel, and the plastic is melted by the rotation of the screw and the heating of the outer wall of the barrel.

Then the zipper machine performs mold clamping and the injection seat moves forward, so that the nozzle is close to the gate of the mold, and then pressurized oil is injected into the injection cylinder to advance the screw, so that the high pressure and faster The speed injects the melt into a closed mold with a lower temperature.

After the zipper machine is maintained for a certain period of time and pressure (also known as pressure holding) and cooled to solidify and form, the mold can be opened and the product can be taken out. The purpose of the zipper machine to maintain the pressure is to prevent the melt in the cavity from being reversed. The flow will replenish the material into the cavity and ensure that the product has a certain density and dimensional tolerance.

The basic requirements of the working steps of zipper mechanical injection molding are plasticization, injection and molding. Plasticization is the premise of realizing and ensuring the quality of molded products, and in order to meet the molding requirements, sufficient pressure and speed must be ensured during mechanical injection molding of zippers.

Zhenyu Zipper Machines Co.,Ltd also discusses implications for both research and the practice of operations in building systems to help people succeed in both the short and long run.
Zhenyu Zipper Machines Co.,Ltd are dedicated to providing excellent underwriting and loss control advice up front, and to ensuring superior customer service through the life of the policy.
If our brand is successful and consistent, it will be much easier to initially grab customers and encourage them to purchase metal zipper waxing machine further.