There are several reasons for the failure of the automatic head threading machine

Generally speaking, the automatic zipper threading machine rarely fails, so when it fails, it is necessary to understand the real reason for the failure of the automatic zipper threading machine. It can also prevent the recurrence of such failures, which is of great practical significance. There are several reasons for the failure of the automatic threading machine.

1. The design and manufacturing defects of the automatic zipper threading machine itself, as well as the defects of the parts and materials used in the manufacture of the automatic zipper threading machine, internal residual stress, human error ( Inspection, installation and improper use), etc., all of which can easily lead to the failure of the automatic zipper threading machine in production.

2. The bad production environment leads to the failure of the automatic zipper puller machine, such as dust, temperature, humidity, medium corrosion, vibration, stress state and other influencing factors, which are not conducive to Production.

3. The aging and failure of the equipment caused by the use of the automatic zipper head machine for too long, or the failure of its maintenance and maintenance leads to premature aging of the machine, which affects the use.

These three points are the common reasons for the failure of the automatic zipper threading machine. Since the failure is very unfavorable for maintenance and post-production, it is necessary to find out the failure of the automatic zipper threading machine. The cause of the failure is very technical and necessary, and knowing this point can also prevent the automatic zipper threading machine from malfunctioning, eliminating the hidden danger of failure from the root cause and extending the service life of the equipment. It is very important.

The above is the reason for the failure of the automatic head threading machine, I hope it will help you. The working principle of the automatic zipper threading machine is equivalent to injecting the plasticized plastic in the molten state (that is, the viscous flow state) into the closed mold cavity with the help of the thrust of the screw (or plunger). The process of obtaining plastic products. If you have any other questions, please feel free to contact us, we will serve you wholeheartedly.