Listen to the master to summarize and analyze the reasons for the disconnection of the zipper mechanical chain

With the overall decrease in the manufacturing cost of zipper machinery and the more mature production technology, the demand for zipper products will continue to grow, and the specifications and quality of zipper products will also be more guaranteed, so the zipper machinery industry can also be more long-term. developing. Listen to the master to summarize and analyze the reasons for the disconnection of the zipper mechanical chain.

1. When the chain of the zipper machine is not tight enough but too loose, the chain sag between the sprocket of the zipper machine and the idler, between the idler and the idler is too large. Large, the chain swings up and down when it moves. Since the hanging shaft is closer to the opening, the hanging shaft will easily jump out of its hanging shaft slot.

2. The chain of the zipper machine has a certain sag during the transmission process. When its chain link is separated from the sprocket, it moves at an uneven speed. There are changes in direction and size. When the speed of the chain link is higher than that of the chain link in front of the chain link when it is separated from the sprocket, because the opening of the hanging shaft slot is relatively close, the hanging shaft will jump out of the hanging shaft groove.

3. Due to the partial shedding of the concrete in the chain groove, sometimes it interferes with the chain link, which makes the running resistance change greatly, aggravates the shaking of the chain, and causes disconnection. When the resistance is too large, after the equipment jumps to a stop, the driving wheel is reversed in a small amount. At this time, the chain link behind is long and the sag is large and cannot be carried, which is also easy to cause disconnection.

4. When the follow-up equipment of the zipper machine stops, the zipper machine is not stopped in time, causing the discharge port to be blocked, and the material is sandwiched between the sprocket and the chain link to make the meshing. Changes occur, and the chain is loose and tight, making it possible for the chain to become disjointed.

The above is the reason for the failure of the zipper mechanical chain disjoint, I hope to help you. In addition, zipper machinery will pay more attention to the research and development of new equipment and new molds while ensuring product quality in the future development. Zipper machinery manufacturers produce and develop zipper equipment based on customer requirements. If you have any other questions, please feel free to contact us, we will serve you wholeheartedly.