BETTER TOUCH BETTER BUSINESS
Contact Sales at ZYZM zipper machine manufacturer.
The zipper machinery is environmentally friendly, stable in quality, low in heat sealing temperature, good in air tightness, strong in tension and durable. After many tests, the plastic clip chain can completely replace imported similar products. Now let us summarize the system in the zipper machinery. Features, 1. Hydraulic system: The function of the hydraulic transmission system is to provide power for the injection molding machine according to various actions required by the process, and to meet the pressure, speed, temperature and other requirements of each part of the injection molding machine. It is mainly composed of various hydraulic components and hydraulic auxiliary components, among which the oil pump and the motor are the power source of the injection molding machine. Various valves control oil pressure and flow to meet the requirements of the injection molding process. 2. Electrical control system: The electrical control system and the hydraulic system cooperate reasonably, which can realize the technological process requirements (pressure, temperature, speed, time) and various program actions of the injection machine. It is mainly composed of electrical appliances, electronic components, instruments, heaters, sensors, etc. There are generally four control methods, manual, semi-automatic, fully automatic, and adjustment. 3. Heating/cooling system: The heating system is used to heat the barrel and the injection nozzle. The barrel of the injection molding machine generally uses an electric heating ring as a heating device, which is installed outside the barrel and is detected by thermocouples in sections. The heat conducts heat through the cylinder wall to provide a heat source for material plasticization. The cooling system is mainly used to cool the oil temperature. If the oil temperature is too high, various failures will occur, so the oil temperature must be controlled. Another location that needs to be cooled is near the feeding port of the feeding tube to prevent the raw material from melting at the feeding port, resulting in the raw material being unable to be fed normally. Note: The above description is an outline of the internal structure of the zipper machine, so far it is only for reference! ! ! This article is organized by Zipper Machinery Co., Ltd. Please indicate when reprinting!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist