BETTER TOUCH BETTER BUSINESS
Contact Sales at ZY zipper machine manufacturer.
The zipper machine is mainly composed of various hydraulic components and hydraulic auxiliary components, among which the oil pump and the motor are the power source of the injection molding machine. Process requirements (pressure, temperature, speed, time) and various program actions. It is mainly composed of electrical appliances, electronic components, instruments, heaters, sensors, etc. There are generally four control methods, manual, semi-automatic, fully automatic, and adjustment. The zipper mechanical heating system is used to heat the barrel and the injection nozzle. The barrel of the injection molding machine generally uses an electric heating ring as a heating device, which is installed outside the barrel and is detected by thermocouples in sections. Heat conduction through the cylinder wall provides a heat source for material plasticization; the cooling system is mainly used to cool the oil temperature. Too high oil temperature will cause various failures, so the oil temperature must be controlled. Another location that needs to be cooled is near the feeding port of the feeding tube to prevent the raw material from melting at the feeding port, resulting in the raw material being unable to be fed normally. This article is from City Machinery Co., Ltd., please indicate the source for reprinting:
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist